Array
(
    [id] => zKnK0kJ1N-o
    [title] => bosch-ve-pump-timing-check-with-cover-plate-on-land-rover-200tdi-and-300tdi-diesel-engines
)
 
Login

Bosch VE Pump timing check with cover plate on - Land Rover 200tdi and 300tdi diesel engines



INTERMEDIATE / ADVANCED Showing you how you can check and adjust pump timing without stripping off the front cover. You need an understanding that the diesel pump needs to be set accurately to achieve the correct results. Alternative tools can be used instead of tools shownThis is an old video that has been re edited and uploaded again.
YouTube
Autos
9-11-2011


View Related Videos

Comments

Related Videos

VE Pump Assembly

Part 1 of How to Assemble a distributor type fuel injection pump.
YouTube
Autos
16-2-2013
Setting the Land Rover Bosch VE FIPE with a dial gauge

http://youtu.be/9-GSNR7W73M Want to know how about tools and techniques to get your 200tdi or 300tdi Diesel Land Rover repaired? We'll show you the correct tools, parts, tricks and tips to help you along the way. From engine repairs and overhaul to retiming the Bosch VE Fuel Injection Pump watch and learn with us!! Trailerfitters Toolbox is connect to and sponsored by Paddock Land Rover spares and accessories.
YouTube
Autos
12-2-2014
Setting injection pump BOSCH VE VAG, VOLVO etc....

Injection pump setting BOSCH VE
YouTube
Autos
30-10-2011
Land Rover 90 Sump Leak Repair 200Tdi

http://toursandtales.com/ - Land Rover guru, Rob Stewart, showed Victoria Koning how to repair a leaking sump. An oily job ... #MuddysBootCamp Location: DIY Garage - Autobedrijf De Boorder (http://www.garagedeboorder.nl/)
YouTube
Autos
7-12-2013
How to time a VE Fuel Pump

Instructional Video on how to time a VE Style Fuel Pump bought to you by Denco Diesel and Turbo. Download our Ebook with Specific Timing Specs at http://www.dencodiesel.com/index.php?controller=registerfree Purchase the specific timing tool bracket at http://www.dencodiesel.com/fuel-filters-misc/5427-timing-tool-95095-10400.html
YouTube
Autos
23-10-2012
Land Rover 200tdi Timing Belt -From Broken Belt to Retiming the Engine

http://www.paddockspares.com Paddock and Rover Spares and Accessories. The full story on the 200tdi timing belt. Dealing with a broken timing belt, retiming the 200tdi engine using the correct tools and refitting the rocker shaft. We explore inspection of components and show which ones are likely to fail. Demonstrations are shown using actual fail components on the Land Rover Discovery 200tdi Gemini engine.
YouTube
Autos
22-8-2012
Land Rover - plastic fuel lines and compression fittings

Diesel fuel pipes have been made of Nylon tubing for quite a while, The tubing is flexible and versatile. We'll show you how to refit a union to the piping, what tool is best to use when cutting and an insight into compression fittings.
YouTube
Autos
16-11-2012
Caler une pompe à injection BOSCH VE

volvo et VAG utilisent ce système de calage valable aussi pour d'autres marques équipées des pompes ve.
YouTube
Autos
30-10-2011
Diesel Pump Calibration VE

Calibration of Zexel fuel injection pump. Visit www.dieselpumpspecialist.com for more videos
YouTube
Autos
12-10-2012
Replacing the P gasket PET 100790 - 300tdi engine Land Rover

Covering the removal of the right parts to be able to replace the P gasket on the 300tdi engine. Shown in this video is the easiest way of getting around the job. The P gasket costs only £0.62 plus VAT from Paddock. Links for gaskets and viscous hub spanner below. Gaskets ERR3284 and PET100790 http://www.paddockspares.com/err3284-water-pump-gasket.html http://www.paddockspares.com/pet100790g-gasket-metal.html. Viscous hub spanner http://www.paddockspares.com/pm1132-viscous-fan-spanner-32mm-usually-8-50gbp.html
YouTube
Howto
4-3-2013
How to: Rotate fuel pin (cone) diaghram on your 89-93 Dodge cummins VE pump! More power!

How to rotate your STOCK fuel pin (cone) diaghram to the deeper side so it adds more fuel as the boost comes in (i explain it in the video), this is your AFC setup. Also works on cummins 4bt engines with Bosch VE pump. This video shows a 92 Cummins in a Dodge ram D350. I recommend paying $105 and getting an aftermarket DennyT fuel pin.. www.dennytperformance.com ... it has a WAY WAY deeper angle than the factory one and will make the old cummins get up.. Thanks for watching! you'll love your truck even more after these mods in my videos!! www.dieseltruckresource.com www.1stgen.org Crossy's son
YouTube
Autos
7-10-2009
THE BEAST ! Land Rover 200 TDI

Facebook: https://www.facebook.com/SkinOvelha
YouTube
Autos
16-12-2013
Diesel pump timing

How to set the injection pump timing on an International Harvester 7.3 IDI diesel engine using a ferret timing meter.
YouTube
People
13-9-2012
TDI Decarbonization With Water Mist

Quick video showing how I used a fine mist water sprayer to decarbonize my engine. This is the second time I ran water vapor through my intake. The first time I did it, I used around 8-10 ounces of water. The second time(in this video) I ran a total of about 17oz of water through the intake. My car has around 162K miles on it with original injectors. The car idles, and runs smoother than it did pre-decarbonization. Actually seems like it may have removed some carbon buildup from around the injectors like I experienced before when I removed and cleaned the injectors-of course this time it was done without taking them out! It's very important to use a very fine mist for this procedure. If you put too much liquid water into the engine you could hydrolock the engine and bend rods. If you go slow, you will be fine. Make sure the engine is totally warmed up before doing this, and perhaps go on a nice hard run after it's finished. Please post your results if you try it too. Also, I wanted to make a note that after doing his the first time you will notice a fairly large difference in the idle and running of the engine. After the first couple treatments not much difference is noted since most of the carbon is gone at that point. I would recommend this be done maybe once every 15k miles or so. Any more often than that would most likely be a waste of effort.
YouTube
Tech
21-8-2011
Land Rover Discoverys 300tdi various wading Clips

Various Clips of two land rover discoverys wading. The green 5dr was floating at one point and took on water up to the bottom of the seats.
YouTube
Autos
14-12-2008
How To Repair Stripped Threads in Aluminium

NOVICE / INTERMEDIATE How to fit thread inserts in where a threaded bolt hole has stripped the thread. These inserts can also be utilised to provide a stronger thread or used when modifying components.. Shown on the 200tdi front cover which has a common problem of threads stripping out where the water pump is bolted to this instructional video will give you then general low down on how to fit the inserts
YouTube
Autos
11-11-2011
Camel Trophy Land Rover Years

oficjalna historia Camel Trophy / Official story of Camel Trophy
YouTube
Travel
13-3-2012
Volkswagen Pump Timing video.wmv

Short video on how to set the injection pump timing on the Volkswagen 1.6 diesel engine. The Bentley service manuals list the following settings: Early Chassis: (1977-1983) 1.5l non-turbo 1977-1980 0.88 +/- 0.05 mm 1.5l non-turbo 1980 with yellow dot 1.15 +/- 0.05 mm 1.6l non-turbo 1981, 1982, and 1983 pickup 0.88 +/- 0.05 mm 1.6l non-turbo 1983 Rabbit and Jetta 0.95 +/- 0.05 mm 1.6l non-turbo 1983 Vanagon 0.90 +/- 0.05 mm 1.6l tubo diesel (1982-1983) 1.00 +/- 0.05 mm MK2 / A2 chassis: (1985-1992): Engine ME (1.6l non-turbo) 1985 0.95 +/- 0.02 mm Engine ME (1.6l non-turbo) 1986 and up 0.90 +/- 0.02 mm Engine MF (1.6l turbo) 1.00 +/- 0.02 mm Engine 1V (ECO diesel) 1.00 +/- 0.02 mm MK3 / A3 chassis (1993-1997): Engine AAZ (1.9l turbo) 0.80 +/- 0.02 mm
YouTube
Autos
10-6-2011
Injector pump banjos-fuel pump banjo unions Land Rover 200tdi and 300tdi enigne

Tips and tricks from a diesel fitter - A 3 minute video to show the difference in 2 banjo unions on the Bosch VE diesel fuel injection pump fitted the the Land Rover 200 tdi and 300 tdi diesel engine. Could it be disastrous if the unions were fitted the wrong way around? Watch to find out..... This is a prelude to removal and fitting of a FIP.
YouTube
Autos
2-11-2011
Land Rover VS jeep rubicon offroad 02-MART-2013 ''Şile//Karakiraz''

Land Rover Discovery 2 td5,offroad,extreme off road,superswamper bogger 37/13/16,eaton detroit no spin lockers,arb air lockers,warn,jeep rubicon 3.6 v6,fox suspension,
YouTube
Autos
6-3-2013
how to repair diesel pump


YouTube
Music
12-8-2013
Petter Diesel Water Pumping Set

Here is a video of my latest creation. I bought this Petter diesel engine some time ago and it had sat in someone's garden for over 2 years. It was soon running again and I smartened it up a little. Soon after I was given a brand new water pump and so I decided to build a water pumping set. The engine is a 1984-1986 Petter AD1 direct injection compression ignition (diesel) engine with single cylinder and overhead valves. The engine produces 3.4HP at 1500RPM (over 8HP can be extracted from this little diesel with a new governor spring!!!!) and the engine is running at about 1000 revs here so is carrying about 2HP. The pump is a Hardi 603 diaphragm type pump and is designed for pumping water and oil. It can pump up to 30 litres per minute at 800RPM and can run with up to 15BAR pressure....pretty impressive! I hope you enjoy the video, I do apologise for the one dark clip, I accidentally deleted it and had to re make it. Enjoy....
YouTube
Entertainment
14-2-2011
VW Jetta Tdi IP Seal R&R Part 3

Part 3 of the Jetta Tdi injection pump seal job.
YouTube
Autos
2-4-2011
VW TDi INJECTION PUMP RELEASE VALVE (PART 1OF2)

Tdi injection pump (PRESSURE RELEASE VALVE). The piston was Broken (PART 2 OF 2 Below) http://www.youtube.com/watch?v=6PW0Z5bGehE&feature=channel
YouTube
Autos
26-10-2011
EXTREME OFFROAD @BELGRAD ''26-01-2014'' **land rover-jeep-nissan-toyota**HD

land rover discovery nissan patrol jeep cherokee wj toyota fj40 extreme offroad mud bogging super swamper bogger tsl silverstone 117 extreme eaton detroit lockers td5 v8 gopro incar
YouTube
Autos
30-1-2014